SE5 Brake & Clutch Bleeding System

Pack size: Unit
SKU: se5-brake--clutch-bleeding-system

The SE5 was developed for garages who want to be flexible in using original, commercial-type canisters of Dot 4 brake fluid. No decanting necessary. The integrated platform holds 5 to 20 litre canisters. The extraction pipe is equipped with a universal screw adaptor for different sized containers. With the help of the SE5 hydraulic brake and clutch systems of cars, commercial vehicles and motorcycles can be maintained. The change of synthetic brake fluid is done fast and without any problems. The complete ventilation of the brake system assures the functional safety of ABS and SBC systems.

  • One-man operation
  • Quick lock coupling
  • The level in the container is monitored and on reaching the minimum level of approximately 1.5 litres, the pump automatically shuts off to avoid air beingpumped into the hydraulic system. It is not necessary to disconnect the device from the vehicle to replace the container, because there is no air in the hose system. After replacing the container the pump can be activated to continue the ventilation.
  • No risky decanting
  • The brake fluid is drawn from the container throughan extraction pipe which is securely fastened in the spout with a universal screw adaptor. The container is placed on the device`s platform and secured with an adjustable belt. The device pumps the brake fluid from the tank into the master cylinder fluid reservoir fitted with a special quick-lock adaptor. When the electric pump is activated, the pressure in the tank is built up slowly to prevent the brake fluid from foaming. The flow oscillates to flush and vent even the smallest air locks or dirt particles out of the hydraulic system and ensures a complete flush and bleed.
  • When the ventilation is complete and the pump is turned off the pressure escapes through the integrated return-flow and the level inside the compensation reservoir is adjusted. When the pressure has fallen to 0 bar the quick lock coupling can be disconnected from the adapter without spilling brake fluid. The 3.5 m long flexible hose offers plenty of room to change brake fluid up on a car lift.