Innovative Cleaning
Bioremediation
Science Focused Cleaning
30 Years Expertise

Brake and Clutch Bleeders

Boasting a simple one man, 5 minute operation, our clutch and brake bleeders comply with the requirements of OEMs and have received official approval and recommendations from the likes of Mercedes, BMW, Ford, Volvo, and Renault.

BRAKEWASHERS

The Rozone Brakewasher is the safe alternative to solvent and aerosol brake cleaning. The mobile unit stops brake dust from being dispersed into the atmosphere by saturating the brakes with non-hazardous aqueous based cleaning fluid safeguarding the health and safety of employees.

The best way to buy Equipment is to contact our friendly team

To discuss the best Equipment for you.
Call our sales team on

SE14 Brake Bleeder
  • The SE14 is the perfect device for all workshops that vent and bleed hydraulic brake and clutch systems and for those who set value on durability, reliability and convenient handling. 
From £1,250.00
Benchtop Parts Washer - From £910
  • Heats to 40°c
  • Solvent Free
  • No vapours
  • 20L Tank Capacity
Adjusting Target For Night View Assistant
  • FOR MERCEDES BENZ GL, SL and S CLASS
  • Accessory for headlight beam setters
  • No power supply needed
  • Easy to mount
£365.00
View Product
BCE500 Brakewasher
  • The unit is air-operated and comes with the following tools to make the cleaning process quick, easy and effective.
  • A nozzle allows the user to first saturate the brakes
  • A flo-thru brush enables agitation and scrubbing off of brake dust deposit
  • Technicians can quickly dry the backing plate and brakes in seconds using the air dryer
£899.00
View Product
Sock Filter
  • The sock filter is situated in the barrel of the Brakewasher and should be changed when the unit is cleaned out
£7.50
View Product
Super Brakewash Concentrate
  • Supplied as a concentrate, simply add to the Brakewasher and top up to the fill line with water
£54.99
View Product
SE5 HY2 Brake & Clutch Bleeding System
  • One man operation, fill- and ventilation system for hydraulic oil. For the use with 20 litre canisters.
  • The tank pipe comes with a screw adapter to fit Pentosin canisters. The canister is placed safely inside the integrated compartment behind the control panel and secured with an adjustable belt. The unit pumps the fluid throughout the hydraulic system complete with no churning of the fluid or air pockets. The working pressure can be adjusted from 0.4 to 3.5 bar
  • The fluid level inside the main tank is monitored by a floater valve and the pump automatically shuts off when the tank reaches the minimum fluid level of 1.5 liters to avoid air being inadvertently pumped into the hydraulic system. It is not necessary to disconnect the device from the vehicle to change canisters because there is no air in the line. After changing to a full canister, the pump can be started again and the process can continue
  • Once the process is complete and the pump is turned off, the built-up pressure escapes through the integrated re-circulation system and the fluid level inside the reservoir adjusts itself accordingly. Once the pressure has fallen to 0 bar/psi, the quick-lock coupling can be disconnected from the bleed valve without spilling hydraulic fluid.
£1,309.00
View Product
S30-60 Brake Bleeding System
  • TheS 30-60/S 30-60 DUOis a solid, mobile brake maintenance device designed for using original commercial 30 - 60 liter canisters of brake fluid. The light aluminum and steel construction supported by two rubber wheels and 2 swivel castors make the device easy to transport and manage, even with a full canister. The pressure is adjustable from 0.4 to 3.5 (6 to 51 psi). The average working pressure is 1.5 to 2.5 bar (22 to 36 psi) ? refer to vehicle manufacturer for specifications.
  • The canister is placed safely inside the integrated compartment behind the control panel and secured with an adjustable belt. The brake fluid is drawn from the canister with a tank pipe fitted for commercial canisters a with2" diameter screw caps. The unit pumps the brake fluid from the tank into the master cylinder fluid reservoir fitted with a special quick-lock adapter.
  • The pressure is built up slowly when the pump is started to avoid foaming of the brake fluid. The extra flow pressure generated flushes and vents even the smallest air locks or dirt particles out of the hydraulic system and ensures a complete flush and bleed. The tank pipe is also equipped with a floater valve to monitor the fluid level inside the canister which is indicated by three control lights (green = > 5 liter
  • When the tank reaches the minimum fluid level of 1.5 liters, the pump automatically shuts off to avoid air being inadvertently pumped into the hydraulic system. The shut-off is indicated by the red control lamp. It is not necessary to disconnect the device from the vehicle to change canisters because there is no air in the line. After changing to a full canister, the pump can be started again and the process can continue.
£1,960.00
View Product
SE30-60 Brake Bleeding System Economy
  • TheSE 30-60is a solid, mobile brake maintenance unit designed for using original, commercial-type 30 ? 60 liter canisters of brake fluid. The light aluminum and steel construction supported by two rubber wheels and2 swivel castors make the unit easy to transport and manage, even with a full load.
  • The pressure is adjustable from 0.4 to 3.5 (6 - 51 psi). The average working pressure is 1.5 to 2.5 bar (22 - 36 psi) - refer to vehicle manufacturer for specifications. The full canister is placed safely inside the integrated com-partment behind the control panel and secured with an adjustable belt. The brake fluid is drawn from the canister with a tank pipe fitted for commercial canisters a with 2? diameter screw caps.
  • The unit pumps brake fluid from the tank into the master cylinder fluid reservoir fitted with a special quick-lock adapter. The pressure is built up slowly when the pump is started to avoid churning of the brake fluid. The flow oscillates to flush and vent even the smallest air and moisture locks or dirt and debris out of the hydraulic system to ensure a complete flush and bleed.
£1,550.00
View Product
S30-60 HY2 Brake Bleeding System
  • The canister is placed safely inside the integrated compartment behind the control panel and secured with an adjustable belt. The device pumps the fluid throughout the hydraulic system complete with no air pockets or foam.
  • The fluid level inside the main tank is monitored by a floater valve and indicated by three control lights (green = > 5 liter
  • When the tank reaches the minimum fluid level of 1.5 liters, the pump automatically shuts off to avoid air being inadvertently pumped into the hydraulic system. The shut-off is indicated by the red control lamp. You don?t have to disconnect the device from the vehicle to change the canister, because there is no air in the line. After attaching a new canister, the pump can be started again and the process can continue.
  • Once the process is complete and the pump is turned off, the built-up pressure escapes through the integrated recirculation system and the fluid level inside the reservoir adjusts itself accordingly. When the process is complete and the pump is turned off, the built-up pressure escapes through the integrated recirculation system.
£1,550.00
View Product
Inclinometer
  • Handheld unit with graphics module and sensor for measuring two levels. The measuring range is +/- 15.
  • Power supplied by customary rechargeable batteries. Battery charger included
£2,910.00
View Product
SE30-60 A10 RoTwin
  • The device uses a double piston system to pump the brake fluid from the tank into the master cylinder fluid reservoir fitted with a special quick-lock adapter.The pressure is built up slowly when the pump is started to avoid churning of the brake fluid.The flow oscillates to flush and vent even the smallest air and moisture locks or dirt and debris out of the hydraulic system to ensure a complete flush and bleed.
  • Fluid level and pressure are continuously monitored and any discrepancy, e.g., empty canister, is indicated by the red light. When the canister is empty, the device automatically shuts off to avoid air being pumped into the hydraulic system.
  • Once the process is complete and the pump is turned off, the built-up pressure escapes through the integrated recirculation system and the fluid level inside the reservoir adjusts itself accordingly.
  • Once the pressure has fallen to 0 bar/psi, the quick-lock coupling can be disconnected from the adapter without risk of spilling brake fluid
£1,695.00
View Product
S15 Brake Bleeder
  • Mercedes Benz approved mobile brake maintenance unit
  • The flow oscillates to flush and vent even the smallest air and moisture locks or dirt and debris out of the hydraulic system to ensure a complete flush and bleed. The fluid level inside the main tank is monitored by a floater and indicated by three control lights (green = > 5 liter
From £1,430.00

Our friendly team are here to help you find the best Equipment to suit your needs

To discuss the best Equipment for you. Call our sales team on